ATTEN AT6030D 9 kHz ~ 3.0 GHz Analizzatore di Spettro

ECCO IL PIU 'ACCURATO Analizzatore di spettro AFFIDABILE E MULTIFUNZIONALE che POTETE TROVARE!

Pensando al HP/AGILENT E4402/03B - L' AT6030D ATTEN è meglio.
La serie AT6000D è un analizzatore di spettro digitale avente larghezza di banda e gamma dinamica.
Si adatta perfettamente alle bande di comunicazione mobile CDMA2000, WCDMA RF system trasmissione EMI  EMC test, ecc

monitor 6,4 pollici a colori TFT-LCD, porta stampante Centronics, USB e memoria interna, le Funzioni di test comprendono CDMA ACP, potenza del canale, etc larghezza di banda occupata, è possibile migliorare lo strumento con le opzioni Tracking Generator, GPIB, LAN e altro ancora.

 La serie AT6000D offre un ottimo rapporto qualità-prezzo e si ha la certezza di un eccellente supporto.
TECHNICAL SPECIFICATIONS.
FREQUENCY Range  9kHz to 3.0GHz (AT6060D : 9kHz to 6.0GHz )Resolution Minimum 1HzSpan Range    
100 Hz/div to 300 MHz/divSelection of 1, 2, 5 steps(automatic), ZERO Span, FULL Span (9KHz to 3.0GHz)
Frequency Selection
Start, Stop, Center, Span setup
pan Accuracy
±3% of the Indicated Span Width
Readout Accuracy
≤±(Indicated frequency × Reference frequency accuracy ＋ Span × Span accuracy ＋ 50% of RBW)
Phase Noise ≤-100dBc/Hz (@ 10kHz offset)
AMPLITUDE
Range +20 dBm ~ -105 dBm, +20 dBm ~ -130 dBm(Pre Amp ON)
Average Noise Level (1kHz RBW, 10Hz VBW)
≤-105 dBm150 kHz ~ 2.7 GHz ≤-127 dBm(Pre Amp On) 20 MHz ~ 2.7 GHz≤-100 dBm, -123 dBm(Pre Amp On) 2.7 GHz ~ 3 GHz≤-130dBm(Pre Amp On) ; Typically
Amplitude Unit
dBm, dBmV, dB㎶, V, mV, ㎶, W, mW, uW
Display Scale linearity
≤ ±1.5 dB / 70 dB (10dB / div), ≤ ±1.5dB / 40dB (5dB / div)≤ ±0.5 dB / 8 dB (1dB / div), ≤ ±0.5dB / 16dB (2dB / div)
Frequency Response (0 dB attenuation)
-3.5 ~ 1.5 dB (100kHz ~ 10MHz)±1.5 dB (10MHz ~ 3GHz)
Reference Level
Range
-90 dBm to +20 dBm
Resolution
0.1 dB steps
Accuracy :
± 1.5 dB
Second Harmonic Distortion
≤-60 dBc, -40 dBm input
Inter-modulation Distortion
≤-70 dBc, -40 dBm input
Residual Spurious
≤-85 dBm (Input terminated, 0 dB attenuation)
Other Input Spurious
≤-60 dBc, -30 dBm input

Resolution Bandwidth
Selections
1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz
Accuracy
≤ ±20%
Selectivity
60 dB / 3 dB ratio < 15 : 160 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)
Switching Error
≤ ± 1.0 dB (1kHz Reference RBW)
Video Bandwidth
10 Hz to 3 MHz in 1-3-10 step

SWEEP Rate 100 ms to 1000 sec，40ms to 1000sec(zero span)Accuracy   ≤ ±20%Trigger SourceExternal(rear), Video, Free Run, LineTrigger Modescontinuous, singleTrigger LevelTTL level

STORAGE
Trace Storage
maximum 900 waveforms
Setup Storage
maximum 3,000 states

SCREEN DISPLAY
Type
6.4" color TFT LCD
Display Resolution
640(H) x 480(V) active display area
Marker Modes
Peak search, Delta marker, Marker to Center, Marker to Reference (8 markers maximum)

INPUT
RF Input Connector
N-type Female, 50 ohm nominal
VSWR
150 kHz to 3.0 GHz, VSWR < 1.5 : 1(with 0 dBm Reference Level)
Maximum input level
0 Vdc, +20 dBm
STANDARD FREQUENCY (10MHZ, REF.)
Temperature Stability± 0.5 ppm
Aging± 0.5 ppm / Year
ConnectorBNC female
Input Level-5 dBm to +15 dBm
Output Level10 MHz, +8 dBm nominal
INTERFACE
Communication Port
RS-232C
Printer Driver
PCL Command, HP, EPSON,SAMSUNG,CANON Laser-Jet, Desk-Jet
Connector
for standard 25 pin female D-Sub parallel printer, supports USB
USB Host Printer Driver
PCL Command, HP, EPSON, SAMSUNG CANON Laser-Jet, Desk-Jet
USB Storage Device
Supports 1.1 and 2.0, for storing image file, supports GIF format
Ethernet(Option)
10-Base-T Ethernet, Supports internet remote control
GPIB Interface(Option)
IEEE488 bus

GENERAL SPECIFICATIONS
STORAGE TEMPERATURE:-20℃ TO 70 ℃RF EMISSIONS : EN 55011, FCC PART15 SECTION 15.101 RF IMMUNITY : EN 61326
SYSTEM SIZE : 350(W) X 195(H) X 370(D)MMSYSTEM WEIGHT : 10KGINPUT VOLTAGE : 100~240 VAC AT 50/60HZ
OPERATING TEMPERATURE : 0 ℃ TO 40 ℃